IDO SERIES 1 is blended with selected 100% paraffinic high viscosity index (VI) base oils having low carbon-forming characteristics. These oils have high natural oxidation stability, enhanced with good dispersant, anti-oxidant, antiwear and corrosion inhibitor additives of proven performance. IDO SERIES 1 provides good sludge and varnish control, long filter life and good engine wear protection.

IDO SERIES 1 SAE* 30 and 40 are prime recommendations for Detroit Diesel 2-cycle engines, providing excellent protection for those engines operating under “stop and go” conditions and prolonged idling. The relatively low sulphated ash level of these oils is desirable to prevent port-blocking by ash deposits that can occur when oils with higher ash levels are used.

IDO SERIES 1 oils can also be used as hydraulic oils as long as care is taken not to mix them with regular hydraulic oils.

Features:

IDO SERIES 1 meets or exceeds the following:

• API CF-2
• Detroit Diesel 7SE270

Benefits:

• Economical
• Proven field performance
• Versatile – can be used as hydraulic fluid

 (please refer to infotech sheet for current grades, sizes and part numbers)

IDO UNIVERSAL oils are blended from select high viscosity index (VI) base stocks and low-ash additives with sufficient detergent to ensure excellent engine cleanliness, minimize ring-sticking and liner-scuffing, prevent sludge formation and stuck valve lifters, reduce bearing corrosion and engine rusting. The low-ash feature reduces combustion chamber deposits, and the high VI base stocks together with oxidation inhibitors provide protection against extreme operating temperature oil breakdown as well as lacquer and varnish deposits. Anti-wear additives reduce wear, and antifoam inhibitors provide enough protection for use even in transmissions and hydraulic systems.

IDO UNIVERSAL was developed to meet the needs of mixed fleet operators in order to solve the problem of selection and application as well as to reduce inventory. IDO UNIVERSAL exceeds all the automotive gasoline and diesel engine manufacturers’ requirements in the appropriate grades. These oils can be used in all high and medium speed diesel engines in automotive and construction applications and certain diesels in marine service. In appropriate grades, this oil is also suitable for use in transmissions and hydraulic systems. IDO UNIVERSAL 10W and 30 grades have Allison C-4 approval for use in their heavy-duty automatic transmissions.

The 5W40 grade is a synthetic blend that provides extra protection for severe duty and has the added benefit of excellent cold start performance while still providing the same protection at high-temperatures as SAE* 30 and 40 grade oils.

Features:

• High viscosity/low ash formulations
• Promotes engine cleanliness
• Excellent resistance to high Temperature

Benefits:

• Multipurpose – reduces inventory
• Excellent hydraulic oil (SAE 10W, 20W and 30)
• Suitable for truck manual transmissions (SAE 50)
• Approved for Allison C-4transmissions (SAE 10W and 30)
• Suitable for other power-shift and industrial automatic transmissions
• Proven performance over breakdown millions of miles

 (please refer to infotech sheet for current grades, sizes and part numbers)